Sink Repair & Installation Cleveland TX for Kitchen and Bath

A sink that leaks, drains slowly, or has come loose is a small job done right — the trap, the seal, and the supply are checked together.

Serving Cleveland and our 12 service areas.

How big is the sink job?

Trap or seal

A leaking trap or a failed seal under the sink, fixed the same visit.

  1. 1. Trap or seal A leaking trap or a failed seal under the sink, fixed the same visit.
  2. 2. Drain or supply A slow drain or a leaking supply line that needs more than a seal.
  3. 3. Full replacement A sink that is cracked or keeps failing, replaced with a new unit.
  • 26Services from one local team
  • 12Areas served around Cleveland
  • Written quoteAsk for a quote first
  • LicensedRMP M-42402 — TSBPE

What a Sink Repair Visit Covers

The trap, the seal, the drain, and the supply are checked together, so the leak is found at the source.

Plumber repairing a sink in a Cleveland, Texas home

Work order

Sink Repair & Installation
  • Leak Check: The trap, the supply lines, and the seal are checked, because a leak under a sink has more than one source.
  • Drain Check: A slow sink is checked at the trap and the branch, so a trap problem is not mistaken for a main problem.
  • Seal and Mounting: A loose or rocking sink is checked at the mounting and the seal before it is reset.
  • Supply Valve Check: The shutoff valves under the sink are checked, because a failing valve is often the real cause of a drip.
  • Repair or Replace in Writing: Repair and replacement are put side by side where both are real, can be quoted before work starts.

What the first sink visit covers

First visit

We check the trap, the seal, the drain, and the supply, then fix the part that failed.

Sink work at Cleveland homes

Kitchen and bathroom sinks in houses, rentals, and manufactured homes.

  • Kitchen sink

    A kitchen sink that leaks, drains slowly, or has come loose.

  • Bathroom sink

    A bathroom sink with a slow drain, a drip, or a leaking trap.

  • Leaking trap

    Water under the sink, traced to the trap, the seal, or the supply.

  • Loose basin

    A sink that rocks or has pulled away from the counter, checked at the mounting.

Sink repair at a Cleveland, Texas business

Sink work at Cleveland businesses

A leaking or slow sink in a business is fixed the same visit where the part allows, with the supply checked at the same time.

  • Restaurant sinks

    Kitchen and hand sinks repaired around service hours.

  • Office sinks

    A restroom sink that leaks or drains slowly is fixed with minimal disruption.

  • Multi-unit sinks

    The same sink fault across several units is checked against the shared drain.

What Sink Repair Cleveland TX Really Involves

A sink is a basin, a trap, a drain, and a supply — and a problem in any one of them shows up under the sink. Checking all four is what finds the source.

Sink repair and installation in Cleveland, TX, covers kitchen and bathroom sinks. A leak under a sink is usually the trap, the seal, or a supply line, and each one is checked in turn — a trap leak drips when the sink drains, a supply leak drips all the time, and a seal leak shows at the rim. A slow sink is usually the trap or the branch: the trap is cleared first, and if the sink is still slow, the branch needs a camera — see Drain Cleaning. A sink that rocks or has pulled away from the counter is checked at the mounting and the seal before it is reset. Where the sink itself is cracked or keeps failing, replacement is the honest answer, and the new sink is installed, sealed, and tested before we leave.

Kitchen sink work often sits beside the garbage disposal, and the two are checked together — see Garbage Disposal Repair and Installation where the disposal is the problem. A sink that smells is usually the trap or the vent, not the sink itself — see Drain Cleaning for a smell that stays after the trap is checked. Related reading: Why Does My Sink Drain Smell in Cleveland?.

Kitchen sink and pipework in Cleveland, Texas
What it is
Repair and installation of kitchen and bathroom sinks.
When it helps
A leaking trap, a slow drain, a loose basin, or a cracked sink.
What you get
The failed part fixed or the sink replaced, tested before we leave.

How a Sink Call Runs

Five steps, from the leak under the sink to a basin that holds water and drains freely.

  1. Call and Questions

    You call (346) 687-0011 and describe the sink: leaking, slow, loose, or cracked. We ask whether it is the kitchen or the bathroom, and whether the leak drips all the time or only when the sink drains.

  2. Check Trap, Seal, and Supply

    We check the trap, the seal, the drain, and the supply lines in turn, so the leak is found at the source.

  3. Clear or Fix the Part

    The trap is cleared, the failed seal or valve is replaced, or the loose basin is reset.

  4. Repair or Replace

    Where the sink itself is done, replacement can be quoted before work starts, and the new sink is installed and sealed.

  5. Test the Sink

    The sink is filled and drained, the trap and supply are checked for leaks, and the basin sits firm before we leave.

Tools We Bring to a Sink

A sink is checked in order: trap, seal, drain, then supply.

The trap is opened and checked for leaks, blockages, and worn seals.

A hand snake clears the trap and the short branch where a sink drains slowly.

The shutoff valves under the sink are tested, because a failing valve is often the real cause.

The seals, putty, and mounting hardware that a reset or a replacement actually needs.

The trap and supply lines are checked for leaks after the repair, so the cabinet stays dry.

When to Call for Sink Repair

  • A homeowner in Liberty Estates has water under the kitchen sink.

    The trap, the seal, or a supply line is the source. Each one is checked in turn.

    Homes
  • A restaurant has a hand sink that drains slowly during service.

    The trap is cleared first, and the branch is checked if the sink is still slow.

    Businesses
  • A property manager reports a bathroom sink that rocks.

    A loose basin is checked at the mounting and the seal before it is reset.

    Homes and businesses
  • A homeowner wants a sink replaced during a kitchen update.

    The old sink is removed, the trap and supply are checked, and the new sink is installed, sealed, and tested.

    Homes

How Sink Work Runs in Cleveland

Sink work in Cleveland is the same in every home type — the trap, the seal, and the supply are the same, and the failures are the same. We work across Liberty Estates and Southern Crossing, and the other Cleveland areas listed on this page.

  • Liberty Estates

    New-build homes where a sink problem is usually a single failed seal or trap.

  • Downtown Cleveland

    Older homes where a sink may sit on ageing supply valves, and the valves are checked at the same time.

  • Southern Crossing

    Mixed site-built and manufactured homes, where a sink replacement is planned around the home type and the counter.

Homes in Cleveland, Texas, with sink repairs
  • Liberty Estates
  • Downtown Cleveland
  • Southern Crossing
  • SH-105 Corridor

From problem to finished result.

Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.

Plumbing team at work in Cleveland, TexasPhoto
  • Leaking Trap Fixed

    Before: Water was pooling under a kitchen sink every time it drained.

    After: The trap seal had failed. We replaced it, checked the supply lines, and the cabinet stayed dry.

  • Slow Sink Cleared

    Before: A bathroom sink drained slowly and gurgled when it was used.

    After: The trap was cleared and the branch was checked. The sink drained freely before we left.

  • Loose Basin Reset

    Before: A kitchen sink rocked and had pulled away from the counter.

    After: We checked the mounting and the seal, reset the basin, and the sink sat firm.

Sink Problems We Fix in Cleveland

The sink symptoms, and what usually sits behind them.

Ask about yours

  • Leak under the sink

    The trap, the seal, or a supply line — checked in turn to find the source.

  • Slow drain

    The trap or the branch, cleared in that order.

  • Loose or rocking basin

    The mounting and the seal, checked before the sink is reset.

  • Cracked sink

    A sink that is cracked or keeps failing is replaced rather than patched.

Why Sink Work Done Properly Matters

A leak under a sink damages the cabinet and the floor beneath it. Finding the source is what keeps a small job small.

Source Found First

Trap, seal, drain, and supply are checked in turn, so the leak is fixed at the source.

Cabinet Protected

A leak caught at the trap is a seal. A leak left alone is a ruined cabinet.

Tested Before We Leave

The sink is filled and drained, with the trap and supply checked for leaks.

Repair or Replace, Honestly

A sink that keeps failing is replaced rather than patched again.

What you leave with

Clear records you can keep and share.

  • What failed

    The trap, seal, or supply part that failed, in plain words.

  • What was replaced

    The part or the sink fitted, and what was checked around it.

  • Test results

    The sink filled and drained, with the trap checked for leaks.

Licensed by the Texas State Board of Plumbing Examiners

RMP M-42402

Our Responsible Master Plumber is Arnold Jay Strass Jr., Master Plumber licence M-42402, current through 06/30/2027.

Ask for a written scope

Sink Work Done by Plumbers

Sink repair and installation is done by licensed plumbers under our Responsible Master Plumber, to the International Plumbing Code (IPC), 2015 edition, as adopted by the City of Cleveland.

Plumber at work on a sink in Cleveland, Texas

Trap vs supply

A trap leak drips when the sink drains. A supply leak drips all the time.

Slow in order

Trap first, then branch — cleared in that order.

Check the valves

The shutoff valves under the sink are checked, because a failing valve is often the real cause.

Is your Cleveland area covered?

Type your ZIP code or town to check. If you are not listed, call and ask.

Cleveland ZIP codes

  • 77327
  • 77328
  • US-59 Corridor
  • SH-105 Corridor
  • SH-321 Corridor

What Cleveland Customers Say

4.7 stars from 13 Google reviews

Sink Questions We Hear

Short answers for the first few minutes. The team can cover the rest.

Still have a question?

Describe what you are seeing and we will point you to the right next step.

(346) 687-0011

Usually the trap, the seal, or a supply line. A trap leak drips when the sink drains; a supply leak drips all the time. We check all three in turn to find the source.

Usually the trap — hair and soap build up there first. If the sink is still slow after the trap is cleared, the branch line is the problem and needs a camera check.

A failed seal or trap is a repair. A sink that is cracked, or that keeps failing after repairs, is usually better replaced. We put both options side by side where both are real.

Whether the problem is the trap, the seal, the drain, or the supply, and whether the sink itself needs replacing. Ask us to quote the repair or the replacement in writing before work starts.

Get Sink Repair Cleveland TX Scheduled

(346) 687-0011

A sink that leaks, drains slowly, or has come loose — call (346) 687-0011 and tell us which sink it is.

Contact Precision Plumbing LLC

Call (346) 687-0011 to schedule sink repair or installation, or ask a question. Monday to Saturday, 7:00 AM to 5:30 PM. Sunday Closed. Tell us whether it is the kitchen or the bathroom, and what the sink is doing.

Call to book a visit

Phone is the fastest way to reach us during business hours. Call and tell us what is happening and where.

Call (346) 687-0011

Hours: Monday–Saturday 7:00 AM–5:30 PM, Sunday Closed. Phone is the only contact channel.

Licensed by the Texas State Board of Plumbing Examiners — RMP M-42402.

737 County Rd 3773, Cleveland, TX 77327

Call now(346) 687-0011